Description

A 2000 Les Paul Standard is now in stock.
This guitar has a heavy mahogany body, an ungrained plain maple top, and an easy-to-grip neck grip that makes it easy to play.
It is equipped with Grover pegs, which keep the pegs rigid and provide rich sustain.
The front pickup is original, but the rear pickup has been replaced with a Duncan SH-4 (JB).
This is the age of heavier pieces, with deep resonance, exiting sharp high end, and rich sustain.

There is a sticker mark on the back of the body and many scratches and dings scattered throughout.
The strap pin hole on the neck side has been refilled and the strap pins have been replaced with new ones on both sides.
Part of the truss rod cover is cracked and there is also a crack inside the front tone knob, but it does not affect the use of the instrument.
There are many cracks on the neck and body binding, pick guard is missing, and metal parts are tarnished.
The guitar has a lot of signs of use, but has been maintained and cleaned at our repair center, including replacement of the rear tone and jack, so playability is good.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 00380338
Year of manufacture: 2000
Country of manufacture: USA
Case: Original hard case
Accessories: Original pots and jacks
Weight: 4.47kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.5mm
SCALE: 628mm (24.75″)
RADIUS: 305mm (12″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modification: Rear tone pot and jack
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, sticker removal, electrical repair

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
00380338

Year of manufacture
2000

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Original pot and jack

Weight
4.47kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
24.5mm

Scale
628mm (24.75″)

RADIUS
305mm (12″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Modification
Rear tone pot and jack

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, sticker removal, electrical repair