Description

Former Kuroyume guitarist Shin signature model FV-80K.
Maple top, mahogany back body, maple bolt-on neck, rosewood fingerboard with 22F specification.
It is equipped with the FRT-5PRO bridge, which is still popular today, and has simple specifications with 1 volume and 3-way switch.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment have been done.
The neck is slightly wavy and has been adjusted by fret adjustment.

There is a wood crack on the 1st floor neck.
The strap pins on the back of the body have been relocated, and the holes are open before the relocation.
There is a ding with wood chips on the body contour area, and the plating of the gold parts has faded and the overall paint is burnished.
There are paint cracks on the neck shorts, and overall, there are scratches, dents, and other signs of heavy use.

Item rank: B+ (Good)

Truss rod: Nearly fully tightened
Fretboard: 60-70%.
Accessories: Gig bag/non-genuine arm
Weight 3.60kg
Serial No serial number

Truss Rod : No problem after checking the rod to 60 degrees left and right.
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.5mm
Neck thickness(near 1st fret)|20.2mm
Neck thickness (near 12th fret)|22.9mm
SCALE|628mm (24.75″)
RADIUS|356mm (14″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.5mm

Neck Thickness (near 1st fret)
20.2mm

Neck Thickness (near 12th fret)
22.9mm

Scale
628mm (24.75″)

RADIUS
356mm (14″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment