Description

The 1958 Korina Flying V is an affordable reproduction of the 1958 Korina V.
It has a fat and mellow sound, which is why it is often used in the rock genre.
The number of these instruments on the market is decreasing every year.

* After it arrived at our store, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, mortised, and electrical repairs have been done.
The frets are originally low and have been worn out to make the frets much lower.
It is currently in good playing condition with no sound jamming.

The gold parts have some spots.
There are other minor scratches and dents.

Item rank: B+ (Good)

Year of manufacture: Made in 2002
Truss rod: There is enough room.
Fret : Less than 50%I
Accessories Soft case / Genuine
Country of Origin KOREA
Weight 3.08kg
Serial U02063861

Truss rod: No problem, confirmed up to 60 degrees to the left and right.
Fret remainder is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.2mm
Neck thickness(near 1st fret)|20.8mm
Neck thickness (near 12th fret)|22.5mm
SCALE|628mm (24.75″)
RADIUS|305mm (12″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret remainder
Defective, need to consider replacing the frets at the next repair

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
43.2mm

Neck Thickness (near 1st fret)
20.8mm

Neck Thickness (near 12th fret)
22.5mm

Scale
628mm (24.75″)

RADIUS
305mm (12″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair