Description

Fujigen J-Standard Mighty Jazz
An electric bass that can be called the standard of FGN basses.
Ash body, maple neck, and maple fretboard make up the royal road.
J type on the front and MM type on the rear. The rear PU coil tap function is equipped with a push-pull switch on the tone pot.

There are some minor scratches and other signs of use.
The neck is in good playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: A190360
Year of manufacture: 2019
Country of manufacture: Japan
Case: Original soft case
Weight: 4.71kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 47.6mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 24.4mm
SCALE: 864mm (34″)
RADIUS: 406mm (16″)
Strings in setup: D’Addario / .045-.135 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and rubbing

Specs: D’Addario / .045-.135 set

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
A190360

Year of manufacture
2019

Country of Manufacture
Japan

Case
Genuine soft case

Weight
4.71kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
47.6mm

Neck thickness near 1st fret
20.7mm

Neck thickness near 12th fret
24.4mm

Scale
864mm (34″)

RADIUS
406mm (16″)

Strings for setup
D’Addario / .045-.135 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing